When I saw this discussion I peered under the van to look at the OS and was
surprised to see that the wire to it was cut off!! Now I do not have any
driveability problems or any poorer milage than any of the other postings so I
wonder if I should reconnect it or leave well enough alone? Maybe some PO found that
the OS was bad and decided this was an appropriate fix
Thanks for any comments

Tony

John Rodgers wrote:

> Todd, get a bottle/can of Marvel Mystery Oil and soak the O2 sensor where it
> screws into the cat or tailpipe. Make sure it is Marvel Mystery Oil and not
> Marvels Top Cylinder Lube. Keep it saturated at the site. Do not run the vehicle
> for 24 hours, just liet it soak. Yo might even have to leave it for 48 hours,
> but if you keep it saturated, it should eventually loosen up.
>
> I have used this stuff to remove exhaust stud nuts off aircraft engines.
> Toughest spot I know for a "stuck" problem.
>
> John Rodgers
> "88GL Driver.
>
> Todd Guttman wrote:
>
> > Does anyone have any suggestions for removing a stubborn Oxygen sensor in an
> > 85 Westy?  The previous owner noted that it is orignal equipment and now
> > quite reluctant to leave its 'home' in the left exhaust pipe after 117k
> > miles.  Liquid Wrench, WD-40 and moderate amounts of 'brutane' have failed
> > me.
> >
> > Any suggestions would be greatly appreciated!
> >
> > Todd
> >
> > 85 Westy, Columbus, OH