

| Subject: | Re: Light switches |
| From: | kenneth d lewis |
| Date: | Tue, 16 Nov 1999 20:14:28 EST |
John;
The first thing that jumped to mind is the ground cluster behing
the fuse block. Leaking windshields cause corrosion here. When I cleaned
mine up I went ahead and put a connector on each wire i.e. some
connectors had two wires per.
Drive Safely & Good Luck
Ken Lewis<Kernersville,NC>86 VW crewcab;60 T-5 Coupe
On Tue, 16 Nov 1999 04:46:52 -0800 John McLean <jaymac@INTERNETCDS.COM>
writes:
>--------------A1B6678AEB128DCEF6788C6F
>Content-Type: text/plain; charset=us-ascii
>Content-Transfer-Encoding: 7bit
>
>I have a similar problem: my headlights (high and low) stopped coming
>on. The dash lights comeon and the park lights come on. The passing
>high beam flasher works so I have high beams if I want to hold the
>dimmer switch up while I drive. The fuses are still good. I replaced
>the dash hadlight switch with another and still have the same
>situation.
___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.Have something to add on this topic today? Revive this thread in the forum »