While I am thinking of it.  I had to change a crank/WP pulley on my 82
diesel.  It was a roadside repair without a spare.  Someone stopped and
helped me.  The only belt we could find on a Friday night was 1/2" to large.
It was still hard to ride it up on the pulley. I notice no adjustments.  The
new belt is due in today.  Is there an adjustable pulley that is not readily
seen.  The Bentley mentions "shims".  I don't see how this works.

Back to the reason I mentioned this.  I needed a small pry bar to make the
belt ride up on the pulley.

Bill
----- Original Message -----
From: Bulley <gmbulley@BULLEY-HEWLETT.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, November 23, 1999 5:56 AM
Subject: Re: Toolkit

Here's the Bulley Toolkit:
A "multi-screwdriver" (five interchangeable bits in the handle)
Vice-Grips(r)