Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Machining Audi wheels for use on Vanagon
Date:Wed, 24 Nov 1999 12:01:31 EST

In a message dated 11/24/99 10:14:58 AM Eastern Standard Time,
ehall@BTV.IBM.COM writes:

<< ed a friends Audi wheels for fit. I have located a set of
 15inch Audi 5000 Turbo Quattro wheels, 1986 vintage, lug pattern 5x112, ET45
 offset, for $150. However, they will require machining of the center hole to
 fit the front hubs on our '88 westy.  >>

that's my site, i had the audi 5000 turbo wheels on my ex- '87 van.  i had a
local machine shop machine the centers for 10 bucks each ($40 for all 4).
you need to get the audi lug bolts for up front, and run elongated studs on
the rears, tho they ~will~ fit w/ stock studs. also need to run a thin spacer
up front.

chris