Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: CV Joint separation from axle shaft; Lessons Learned.
From:kenneth d lewis
Date:Thu, 25 Nov 1999 17:12:10 EST

Tom;

        Whatever you do; DO NOT strike the end of the spline shaft with a
hammer. It will mushroom the end slightly making it nearly impossible to
remove. Always use something softer (brass) than the shaft to drift it
out.
Drive Safely & Good Luck
Ken Lewis<Kernersville,NC>86 VW crewcab;60 T-5 Coupe

On Thu, 25 Nov 1999 12:24:19 -0800 "Thomas D. Hanlon"
<hanran@EARTHLINK.NET> writes:
>Listees,
>
>In the process of replacing a torn CV joint boot, I have removed the
>half shaft from the rear suspension.  I am ready to remove the joint
>from the shaft....

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.