You don't need to remove the clevis!  Just disconnect the fluid
reservoir tube and pipe, unbolt the old master (or reverse that order if
it is easier, I can't remember) and slip it off the clevis pin, then
slip on the new cylinder and bolt it up.  Put lots of newspaper on the
floor along with rags to catch all the fluid that will be lost.  My
master didn't even come with the pin.

Jeff wrote:
>
> Anyone ever replaced a clutch master cylinder on an 84 Vanagon?  What is
> the best way to get to the cotter pin on the clevis.  I can barely reach
> the rubber sleeve with my fingers.  Any other advise on the removal and
> replacement would be appreciated.  Thanks

--
Stuart MacMillan
Manager, Case Program
800-909-8244 ext 208

Getting your share of the Net yet?
http://www.cobaltgroup.com
http://www.casedealer.com/demo
http://www.caseihdealer.com/demo